Pro duct1-manufacture,factory,supplier from China

Oriented strand board is a new type of high-strength environmental protection board. Under the background of the prominent structural contradiction between the supply and demand of wood in my country and the prevalence of green environmental protection concepts, oriented strand board relies on a wide range of material sources, advanced production technology, and excellent mechanical properties.

  Density board is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.Certificates ISO FSC SGS  

Features of MDF:1. The internal structure is uniform, the density is moderate, the dimensional stability is good, the deformation is small, and the physical and mechanical properties are moderate.2. The surface is smooth and smooth, with good machinability. It can be pasted with sliced veneer or with novel and beautiful patterns.

Today I will tell you which one is better, E1 density board or E2, and the characteristics of MDF?Which is better, E1 density board or E2?    Since the glue used in the processing process will release carcinogenic formaldehyde, standards have been formulated according to the amount of formaldehyde released, including European standards, national standards, and American standards.

    Density board is made by soaking wood, tree branches and other objects in water and then heat-grinding, paving and hot-pressing. It is made of wood fiber or other plant fiber.Man-made panels made by applying urea-formaldehyde resin or other suitable adhesives. Of course, the glue contains two chemicals, benzene and formaldehyde.

Is MDF or solid wood particle board better? Compare the advantages and disadvantages of the two:MDF:Advantages: The material is delicate, the edge sealing of the cutting surface is well done, it is not easy to open the glue, and it is convenient to make various shapes, so it is often used to make door panels or back panels.2. Disadvantages: The base material is powder, and the glue used is more than particle board, so it is easy to have environmental protection problems.

     Particleboard, as a very common decorative material at home and abroad, in addition to conventional furniture manufacturing, particleboard actually has other wider uses, such as suspended ceilings, partition walls, interior decoration, etc.Particleboard has uniform density and thickness, and smooth surface. It is a good veneer substrate. Industrial-grade particleboard can be used in many veneer materials and is very suitable as a veneer substrate.  2.Particleboard furniture refers to furniture that directly uses particleboard as a finish.

What is Black MDF ? What advantages does Black MDF have?    Carbon is a non-metallic element that is stable at room temperature, unreactive, and has extremely low toxicity to the human body. It can be safely ingested in the form of graphite or activated carbon. Carbon crystal, the full name of carbon microcrystal, is a crystal structure of carbon.

    Advantages of Carbon Crystal Medium Density Fibreboard:1. High environmental protection performance.The product does not need to be painted after coating, reducing the harm of formaldehyde to human body, and the environmental protection grade is higher than the national environmental protection standard. 2.

Advantages of Carbon Crystal Plates or Black MDFCarbon crystal panels are environmentally friendly, durable, moisture-proof, flame-retardant, sound-absorbing, anti-aging and other practical and excellent features, helping you easily have a healthy, environmentally friendly and safe living home.Noise reductionThe carbon crystal wall panel has a good diffuse reflection for sound, and has a relatively buffering impact of the subwoofer; the sound insulation has reached 29 decibels after testing, which is 13 decibels higher than the sound insulation of a 25 cm wall, which solves the incoming noise

    MDF is actually a kind of density board, which also includes short fiberboard and long fiberboard. MDF is mainly made of plant fibers or wood fibers. After the fibers are crushed, separated, and dried, a urea-formaldehyde resin or other suitable adhesive is added and pressed at high temperature. A kind of man-made board.The thickness of MDF is generally between 3mm-30mm, and the density of MDF is very high. Generally, the choice of MDF depends on the density of MDF to determine the quality of MDF. The density of MDF is generally It is in the range of 0.5-0.8g/cm³.

What is Fire Resistant MDF ?How to produce it ? What is its application?The fireproof board is a kind of board that can suppress the burning speed of the flame in the ignited state, or directly extinguish the flame.

Fiberboard is a kind of man-made board made of wood fiber or other plant fibers with urea formaldehyde resin or other applicable adhesives. As it is soft and impact resistant, it has high strength, uniform density after pressing, and is easy to reprocess, but its disadvantage is poor water resistance.Advantages1.Fiberboard is easy to be coated.

Instruction of Waterproof FiberboardWaterproof Fiberboard, also known as fiberboard , is an artificial board made of wood fiber or other plant fibers as raw materials and urea-formaldehyde resin or other suitable adhesives.Warehouse  Xinhua Wood Company Show  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

Soak the common substrate and moisture-proof substrate in water at the same time, and the expansion rate of the common plate is significantly higher than that of the moisture-proof plate after two hours of expansion change. The moisture-proof board has good moisture-proof performance and is suitable for making kitchen furniture and bathroom furniture.Damp-proof board cannot be directly used on furniture, and decorative paper should be pasted on the surface. The normal practice is to soak the decorative paper in melamine solution, and then press it on after hot pressing.

MDF HDF Details  Size:1220*2440 1250*2500 or customized sizeThickness:1-30mmGlue:E0 /E1 /E2Material:Polar pine combiDensity:650-980 kg/m3Certificate:ISO, SGS, FSC,P2Moisture Content:4-6%Usage:for laminating board, furniture back panel, flooring, interior and exterior decorationMOQ:1X40HQPayment Term:T/T or 100% LC at sightPacking:Standard exporting palletsDelivery time:20 days after received dopositMDF HDF Properties    EN622-5:2009 MDF-GPPropertyTest MethodUnitRanges of nominal thickness (mm)1.8-2.52.5-44-66-99-1212-1919-3030-45＞45Swelling in Thickness 24 hEN317%45353

What is Black Core HDF?    The Black Core HDF floor is a floor made of this carbon crystal.    Carbon crystal is a kind of microcrystalline carbon particles purified from minerals, commonly known as high carbon graphite.

      MDF is mainly used for laminate flooring, door panels, partition walls, furniture, etc. MDF is mainly used for surface treatment of oil-mixed technology in home decoration; MDF is generally used for furniture, because the density of high-density boards is too high. It cracks easily, so there is no way to make furniture.       Generally, HDF is used for indoor and outdoor decoration, office and civilian furniture, audio, and vehicle interior decoration. It is also a good material for packaging.

  According to their different densities, they are divided into high-density boards, medium density boards and low-density boards. Due to its soft and high impact strength, the density of the density board is uniform after being pressed, and it is also easy to reprocess. It is a good material for making furniture in foreign countries,but its disadvantage is poor water resistance.

Medium Density Fiberboard Introduction:Density board, also known as fiberboard (full name: MDF fiberboard), is a man-made board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board. Mainly used for laminate flooring, door panels, partition walls, furniture, etc.

The reason for the deformation of density board furniture is here?    We all know that MDF has a wide range of applications. However, furniture made of this kind of board often has such a problem: the furniture board is deformed, which is very annoying.It not only seriously affects the normal use of our furniture, but also has a bad influence on family life. We knowThere are many reasons for this problem, and we will introduce them in detail below.1.

The difference between density board and particle board    Solid wood particle board, also known as particle board, is different from MDF, which uses wood fiber and plant fiber as raw material, but uses log particles (small diameter wood, thinning wood, wood core, board skin, branch wood, etc.) The adhesive is processed by high temperature and high pressure.

A. What material is MDF made of?1. Medium fiberboard is a kind of density board, which is divided into long fiberboard and short fiberboard. Its raw materials are mainly wood fibers or other plant fibers, which are made after crushing, fiber separation, drying, applying urea-formaldehyde resin or other suitable adhesives, and then hot pressing.2. MDF has a square and smooth surface, and its processing performance is excellent. It can be pasted with sliced veneer. It is often used to make furniture, partitions, etc.

   Density board, also known as fiberboard, is an artificial board made of wood fiber or other plant fiber by hot pressing after slicing, cooking, fiber separation, and drying, then applying urea-formaldehyde resin or other suitable adhesives. the   According to the density, it can be divided into low-density board (weight less than 550KG/M3), also known as low-density fiberboard. Medium density board (weight 550~880KG/M3), also known as medium density fiberboard.