​Hydroxypropyl Methyl Cellulose HPMC-manufacture,factory,supplier from China

Raw material of Particle board.1.Particleboard is made on the basis of scrap materials, but the range of scrap materials is relatively wide. According to different types of scrap materials, particleboard can be divided into wood particleboard, bagasse particleboard, flax chipboard, cotton stalk particleboard, Bamboo particle board, etc., cement particle board, gypsum particle board. It can be seen that most of the scraps contain wood cellulose.

What is Black MDF ? What advantages does Black MDF have?    Carbon is a non-metallic element that is stable at room temperature, unreactive, and has extremely low toxicity to the human body. It can be safely ingested in the form of graphite or activated carbon. Carbon crystal, the full name of carbon microcrystal, is a crystal structure of carbon.

The following aspects should be paid attention to when choosing medium density fiberboard;1. From the appearance, check whether the thickness and density are uniform, whether the corners are damaged, whether there are delamination, blister, charcolization, etc., and whether there are soft parts.2. When conditions permit, you can saw a small piece of medium density fiberboard and soak it in water with a water temperature of 20°C for 24 hours to observe its thickness change, and at the same time observe whether there are small bulges on the surface of the board.

     In foreign countries, density board is a good material for making furniture. Density board can be selectively used to make furniture products. When we choose and buy, it is best to choose brand products. We all know that density boards are not good at holding nails, so we need to use a lot of glue for bonding when making furniture. , so we need to detect the content of formaldehyde. Density furniture uses wood-based panels as its inner material, so its material is not easy to deform, and it will not be infested with insects.

What is the main reason for the deformation of density board?The main reason for the deformation of the density board is the production process or the storage and use process.1.

    MDF is actually a kind of density board, which also includes short fiberboard and long fiberboard. MDF is mainly made of plant fibers or wood fibers. After the fibers are crushed, separated, and dried, a urea-formaldehyde resin or other suitable adhesive is added and pressed at high temperature. This kind of man-made board is often used in interior decoration.Xinhua Wood Storage  Quality Certificates  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan.

1.

     Density board is called medium density fiberboard（MDF) . It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure. According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard. It is widely used in the fields of furniture manufacturing and decoration in China.Xinhua Wood Show  Xinhua Wood Machinery  Gaotang County Xinhua Wood Industry Co., Ltd.

Variety of Wood Panel1. Low density fiberboard It is a panel made of wood or plant fiber shavings that are applied with a large amount of urea-formaldehyde glue and auxiliary materials. Its density is lower than 450 kg/m3, the fiber particles are larger, the internal structure is not uniform, the strength is relatively insufficient, and the weight is light.2. Medium density fiberboardIt is a board made of wood fiber or other plant fiber, added with urea-formaldehyde adhesive, and pressed under high temperature and high pressure.

    Medium density fiberboard is a kind of artificial board made from the thinned wood of branches, small diameter wood, fast-growing wood, bamboo and other plant materials with limited wood resources. The comprehensive utilization rate of wood is high, which conforms to China's forestry development policy and is conducive to the implementation of China's forestry sustainable development strategy.Medium density fiberboard DisplayProduct Certificates-SGS,ISO9001,FSC  

1. The use of particleboard in flooring:Particleboard is used as flooring material in temporary structures with less load. It is also widely used as a covering for hardwood floors because hardwood planks have low resistance to scratches to protect them. Wood veneer particleboard or laminated particleboard is used for floors where a finished aesthetic look is desired.2. Use of particleboard in floor underlayment:Particleboard is widely used as floor underlayment or as a basis for parquet, wooden or carpet floors.

The difference between medium density fiberboard and particle board is so bigAbstract: There are many types of man-made panels, and many friends are always unclear when they are decorating. Some friends always can't tell the difference between particleboard and density board. In fact, as long as you know the two kinds of boards, it is very simple to distinguish them.1. MDF and particle board materials are differentParticleboard is processed by high temperature and high pressure after the logs are broken, and the wood chips are the main raw materials.

What are the characteristics of high-strength particleboard?The high-strength particleboard adopts the two-stage chipping technology combining the drum chipper and the shaving chipper. The size of the shavings produced by this technology is rich, and it is very easy to change the length of the wood chips. It can effectively use small-diameter materials and save wood resources.

Why choose Xinhua Wood MDF boards?1. Competitive price.

Shopping skills of MDF Fiberboard:Environmental protectionAccording to national standards, MDF can be divided into E0, E1, and E2 according to its free formaldehyde content. The formaldehyde emission of E2 grade is ≤5mg/L; the formaldehyde emission of E1 grade is ≤1.5mg/L, which can be directly used for interior decoration; the formaldehyde emission of E0 grade is ≤0.5mg/L.

Particleboard Quality Judgment1. From the appearance point of view, look at the size and shape of the wood chips in the center of the cross-section. The length is generally 5-10MM in length. If the length is too long, the structure is loose, and if it is too short, the deformation resistance is poor, and the so-called static bending strength does not meet the standard;2. The moisture resistance of wood-based panels depends on its density and moisture-proof agent.

Carbon Crystal Panel and Its AdvantagesCarbon crystal panel is generally used in paint-free technology, with high environmental protection and good moisture resistance. In terms of materials, they all belong to composite boards. If they are under the same brand, the quality of carbon crystal boards is better. In contrast, carbon crystal panels are waterproof, moisture-proof, environmentally friendly, formaldehyde-free, crack-resistant and non-deformable. Carbon crystal plate is a new type of high-tech environmental protection material.

Oriented strand board is a new type of high-strength environmental protection board. Under the background of the prominent structural contradiction between the supply and demand of wood in my country and the prevalence of green environmental protection concepts, oriented strand board relies on a wide range of material sources, advanced production technology, and excellent mechanical properties.

Manufacturing Process Broadcast1. Chipping: It is the manufacturing workshop of the raw materials in the whole board production. It mainly cuts loose wood into wood chips that meet the production specifications, so as to provide better conditions for fiber separation in preparation for heat.2. Thermal grinding. The wood chips cut out of the chipping workshop are preheated and cooked, and then mechanically separated to obtain fibers.3. Fiber drying: heat grinding and sizing to make the moisture content of the fiber reach 40%-50%.

    OSB board is the upgrading of traditional particle board.

Particle board is also called chip board or flake board. It is made of wood or other nitrocellulose materials. It is a wood-based board glued under the action of heat and pressure after applying an adhesive.

Product DetailsSize1220*2440mmThickness12mmCertificationFSC, CE, ISOMOQ20 CbmDensity600-700 Kg/CbmGlueWBP Mdi Phenolic E0 E1 E2Moisture6-8%Thickness Tolerance+-0.2mmSize Tolerance+-2mmTransport Packageby Standard Exporting PalletsSpecification1220*2440OriginChinaHS Code4411142900Production Capacity30000 Cbm Monthly

A. What material is MDF made of?1. Medium fiberboard is a kind of density board, which is divided into long fiberboard and short fiberboard. Its raw materials are mainly wood fibers or other plant fibers, which are made after crushing, fiber separation, drying, applying urea-formaldehyde resin or other suitable adhesives, and then hot pressing.2. MDF has a square and smooth surface, and its processing performance is excellent. It can be pasted with sliced veneer. It is often used to make furniture, partitions, etc.

Uses of Particleboard1. As a base material: Industrial grade particleboard is suitable as a base material for veneer, and many veneer materials are available. Particleboard has uniform density, small thickness tolerance, and smooth surface, which is a good veneer substrate.2. Kitchen cabinets: Particleboards can be used as cabinet shelves, side panels, back panels, drawers, doors and other parts. Particleboards have performance and economic advantages. The grades of kitchen cabinet boards are M--S, M- -2, M--3.3.